Technical data

806N device description
22 Operating manual 806N Version 00.0 - 12/2012
4.1.4 Stacker
After sewing the fabric parts together, the machine stacks the product
cleanly and tidily away. This is done by means of the outfeed roller (1),
the clamp brackets (2, 4) and the support (3).
You can select between two stacking variants,  Section 5.7.4,
Selecting/deselecting stacker variants.
Figure 5: Overview of the stacker
4.1.5 Main switch
You can use the main switch to switch on the machine including the oper-
ating terminal. Before switching off the machine with the main switch, you
must first shut down the operating terminal,  Section 5.1, Switching on
the machine and  5.9, Switching off the machine.
Figure 6: Main switch




(1) - Outfeed roller
(2) - Inner clamp bracket
(3) - Support
(4) - Outer clamp bracket
(1) - Off
(2) - On
(3) - Rotary switch


