Technical data

Safety instructions
12 Operating manual 806N Version 00.0 - 12/2012
3 Safety instructions
This section contains basic instructions for your safety. Read the instruc-
tions carefully before setting up or operating the machine. Make sure to
follow the information included in the safety instructions. Failure to do this
can result in serious injury and damage to the machine.
3.1 Basic safety instructions
The machine may only be used as described in this operating manual.
The operating manual must be available at the machine's location at all
times.
Work on live components and equipment is prohibited. Exceptions are
defined in the specifications in DIN VDE 0105.
For the following work, the machine must be disconnected from the power
supply using the main switch or by disconnecting the power plug:
• Replacing the needle or other sewing tools
• Leaving the workplace
• Performing maintenance work and repairs
Missing or faulty spare parts could impair safety and damage the machine.
Therefore only use original spare parts from the manufacturer.
Transportation Use a sturdy lifting carriage for transporting the machine. If a longer lifting
carriage is not available, then use a small lifting carriage under the right
side of the machine. Raise the machine max. 20 mm and secure it against
slipping off.
Set-up The connecting cable must have a power plug approved in the specific
country. The power plug may only be connected to the power cable by
a qualified specialist.
Operator's
obligations
Observe the country specific safety and accident prevention regulations
and the legal regulations concerning industrial safety and the protection of
the environment.
All warnings and safety signs on the machine must always be in legible
condition and may not be removed. Missing or damaged labels must be
replaced immediately.
Requirements
to be met by the
personnel
The machine may only be set up by qualified specialists.
Maintenance work and repairs may only be carried out by qualified spe-
cialists.