Technical data

Performance description
Operating manual 806N Version 00.0 - 12/2012 11
Parts set: Controlled 2-way needle thread tension
For especially flexible stitches in the bar area
Parts set: Pressure foot for underwear
For critical materials
The following conditions must be satisfied in order to use the
pressure foot:
– Transfer plate without inner slider
– For double seams, a minimum clearance of 2.5 mm
between the outer pocket edge and the 1st seam
0396 222654
Parts set: Finished parts for underwear, required in addition to
the form-dependent parts used for self-production of an edge
folding set.
Basic pocket shapes F1000 and F1500 0805 417544
Basic pocket shapes F2000 and F2500 0805 417554
Basic pocket shapes F3000 and F3500 0805 417564
Basic pocket shapes F4000 and F4500 0805 417574
Parts set for pockets > 200 x 220 mm
(up to 220 x 230 mm)
Low-temperature needle cooling (eddy current cooler) 0804 357509
Pressure hose, pneumatic connection 0797 003031
Parts set: Marking light
Laser marking light for positioning parts.
9880 806008
Parts set: Automatic vacuum
For automatically switching on a vacuum via a light barrier for
holding the material to be sewn on the table plate.
0805 402904
Additional equipment Order number