Technical data

Set-up instructions
Operating manual 806N Version 00.0 - 12/2012 101
• 9047 000013 - 2 liters
• 9047 000014 - 5 liters
Oiling the wicks
and felt
The wicks and felt in the sewing head must be soaked with a small amount
of oil when setting up the machine, and especially after longer standstill
periods.
Oil the wicks and felt as follows:
Figure 69: Sewing head with open cover
Risk of injuries due to contact with oil.
Contact with oil can cause irritation, rashes, aller-
gies or skin injuries.
 ALWAYS avoid long-term contact with oil.
 ALWAYS thoroughly wash the affected areas if
contact with oil occurs.
WARNING
Risk of environmental damage from old oil.
Incorrect handling of old oil can result in severe
environmental damage.
 ALWAYS observe the legally prescribed regula-
tions for handling and disposal of mineral oil.
 Take care to ensure that oil is NEVER spilt.
ATTENTION


(1) - Wick
(2) - Felt