Technical data

Set-up instructions
98 Operating manual 806N Version 00.0 - 12/2012
6.5.2 Installing the thread reel holder
Due to the height the thread reel holder is not installed when the machine
is delivered. The thread reel holder must be installed with the covers in
place because the covers can no longer be fitted when the thread reel
holder is installed.
Install the thread reel holder as follows:
Figure 66: Installing the thread reel holder
1. Insert the thread reel holder (1) into the hole in the thread reel holder
bracket (3).
2. Align the thread guide at right angles to the sewing arm.
Figure 67: Thread guide alignment
3. Clamp the thread reel holder (1) using the clamping lever by grasping
the clamping lever (2) at the left of the stacker cover.
 The thread reel holder is now installed.
(1) - Thread reel holder
(2) - Clamping lever
(3) - Thread reel holder bracket


