Instruction manual

So as to avoid electric shock hazards, do not open the cover of the electrical box of the
motor or touch any part inside the electrical box with the power to the machine turned .
To prevent possible personal injury, never operate the machine with the belt cover and the
To protect against possible personal injury resulting from being caught in the motor, use a
To avoid electric shock hazards, never operate the machine with the ground wire for the
During operation, be careful not to allow your or any other person's head, hands or fingers
to come close to the handwheel, V belt and motor so as to prevent possible personal injury
that may occur when your hands/fingers are caught in the machine. Also, do not place
So as to avoid possible injury to your hands and fingers, do not put any of them near the
cloth cutting knife and the needle when turning the power to the machine or while the
To prevent possible injury to your hands and fingers, do not put any of them inside the eye
To avoid electric shock hazards and accidents arising from damaged electrical components,
So as to protect against possible personal injury resulting from abrupt start of the machine,
In the event of a power failure, be sure to turn OFF the power to the machine to protect
So as to protect against possible personal injury resulting from abrupt start of the machine,
remove the belt cover, motor pulley cover and the V belt after turning OFF the power to the
machine and confirming that the sewing machine will not run even by depressing the start
Before inspecting, adjusting or cleaning the machine, threading the machine head or
replacing the needle, so as to protect against possible personal injury resulting from abrupt
start of the machine, be sure to turn OFF the power to the machine so as to prevent an
accident and confirm that the sewing machine will not operate even when depressing the
To protect against personal injury resitting from possible drop of the machine, do not carry
your machine by holding the cloth plate cover by hand. Doing so may cause the cover to
ON
FOR SAFE OPERATION
eye guard removed.
motor that is provided with a motor pulley cover.
power supply removed.
anything close to them.
machine is in operation.
guard while the machine is in operation.
be sure to turn OFF the power switch before inserting/detaching the power plug.
make sure to turn OFF the power to the machine when you leave your machine.
against possible personal injury resulting from abrupt start of the machine.
foot pedal of the sewing machine.
open or break resulting in drop hazards.