Instruction manual

4.2 CHECKING THE DIRECTION OF ROTATION
The correct direction of rotation of the sewing machine
is clockwise when observing the machine from the
handwheel side.
Never allow the machine to rotate in reverse direction.
If the machine rotates counter clockwise, the oil pump
will fail to function resulting in seizure.
4.3 ATTACHING NEEDLES
Caution: Danger of injury!
To protect against possible person injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
The standard needle is DC27 # 11/B27 Nm 75 (Order.
No.9092 002700 075S). You can also use he DC x 1
needle. In this case, however, the clearance provided
between the needle and the looper may be required
to be adjusted. If sewing needs to be carried with a finely
adjuste d thread tension, use the DC x 27 needle.
Bring needle clamp 1 up to the highest position.
Loosen needle screw 2 , and fully insert the
needle into the needle clamp hole with the needle
recess facing backward as viewed from the
operator's side.
Tighten needle screw 2 .
2
2
2
1
2
1
2
2
2
1
7