Instruction manual

Fully-submerged type
Attach frame support plate joint A 4 , frame
support plate joint B 3 and rubber cushion 2
to frame support plate 1 .
Fix support plate boltB6tothemachinetable
Put frame support plate joint A 4 and frame
support plate joint B 3 between support plate
washers 5 respectively.
Install frame support plate 1 so that the cloth
plate is 5 mm higher than the upper surface
the machine table.
Install waste chute stopper plate 9 on frame
support plate 1 .
Install waste chute (upper) 7 on waste chute
stopper plate 9 .
Install waste chute (lower) 8 on waste chute
(upper) 7.
The installation of the chutes can be adjusted
within a length of 48 mm.
of
4
2
1
3
5
5
6
5
4
1
5
6
3
6
5
5
9
7
1
8
48 mm
4