Programming instructions

4.2 Changing parameter values
The parameter values are changed in the individual parameter
screens.
–
Select the required parameter with cursor keys ”!" or """.
The symbol of the selected parameter appears in reverse video.
–
Press Enter.
The settings window appears with the current values or to enable
values to be entered.
–
Change the parameters as described under
1
to
4.
–
Press Enter.
The new parameter settings are saved.
When changing parameter values we must distinguish among four
groups of parameters:
1. Functions that are switched on and off
–
Switch the parameter function on and off with cursor keys ”#" or
"$".
(on) (off)
2. Parameters with various functions
–
Set the required parameter function with cursor keys ”#" or "$".
3. Parameter whose values are entered with the decimal keypad
entry: 100 - 4800
–
Enter the required parameter value on the decimal keypad.
Caution:
The value must be within the set limits.
If the value entered is too large or too small, the upper or lower
limit is displayed when the Enter key is pressed.
–
If a plus or minus sign appears in front of the parameter value, it
can be changed with the " " key.
8