Programming instructions

A.5 Switching programs
A.5.1 Switching from the ”dart” to the ”side-seam” program
Switching from the ”dart” to the ”side-seam” program is carried out in
the following sequence:
–
When the main screen is displayed press key "1".
The material-guide rail moves to the left.
–
Change the rail.
–
Switch off the vertical cutter.
–
Bring the protective hood to its medium position.
–
Press Enter.
The material-guide rail moves to the right into the starting position.
This message appears:
–
Press the ESC key.
–
When the main screen is displayed press the "F3" key.
–
Select the ”side-seam” program with cursor keys ”#" or"$".
–
Press the F1 key to leave the menu.
The sewing machine is now ready to sew side seams.
A.5.2 Switching from the ”side-seam” to the ”dart” program
Switching from the ”side-seam” to the ”dart” program is carried out in
the following sequence:
–
When the main screen is displayed press key "1".
The material-guide rail moves to the left.
–
Change the rail.
–
Press Enter.
The material-guide rail moves to the right into the starting position.
This message appears:
–
Press the ESC key.
–
When the main screen is displayed press the "F3" key.
–
Select the required dart program with cursor keys ”#" or"$".
–
Switch on the vertical cutter.
–
Lower the protective hood.
–
Press the F1 key to leave the menu.
The sewing machine is now ready to sew darts.
60