Programming instructions

3.1.2 Transferring data from the memory card to the controller

CAUTION:

The sewing machine must not be switched off during the transfer of

data to the controller.

–

When the main screen is displayed insert the memory card in the

side of the controller in the direction of the arrow.

The panel with lettering must be towards the operator.

–

The controller switches to save mode.

The arrow in the centre of the display indicates the direction of

transfer:

load

data from the memory card

into the controller

save

data from the controller

to the memory card(NB write protection)

–

Set the required direction of transfer.

Load

data: Press cursor key """.

–

Press function key

(start).

Data transfer begins.

Transfer arrows appear above the arrow in the centre of the

display.

When data transfer is complete the transfer arrows disappear and

the instruction "switch the sewing machine off" appears.

–

Switch the sewing machine off.

–

Remove the memory card.

–

Switch the sewing machine back on.

3.2 Changing the memory-card battery

Memory-card retention period with no change of battery: approx. 4

years.

CAUTION:

Programs stored on the memory card will be erased when the battery

is changed.

Load programs into a controller before changing the battery.