Programming instructions

6.4.7 Testing the sewing drive

This program is used to test the needle positions and the various rpm

stages of the sewing drive.

–

Press the Enter key to run the test program.

–

Select the symbol of the required parameter with cursor keys ”!"

or """.

The selected symbol appears in reverse video.

–

Adjust the parameter with cursor keys ”#" or "$".

the sewing drive runs at the selected rpm,

the upper part of the machine moves to its set position

upper part of machine in position 2

upper part of machine in position 1

upper part of machine halts unpositioned

select motor rpm

Entry: 100 - 4800 [rpm]

–

Press function key F2.

The sewing drive runs at the set rpm.

The current rpm (e.g. "0199 rpm") appears in the upper right-hand

corner of the display.

–

Press function key F3.

The sewing drive halts.

The upper part of machine moves to the set position.

–

Press the "STOP" key to leave the program.