Programming instructions

6.4.6 Testing the step drive

This program tests the material-guide rail drive.

CAUTION: danger of breakage

Do not allow the step drives to travel as far as the stop during the

function test.

–

Press the Enter key to run the test program.

–

Select the symbol for the motor with the cursor keys

"!" or """.

Motor 1 = X axle

Motor 2 = Y axle.

–

Press Enter.

–

Select the symbol for the rpm setting with cursor keys ”!" or """.

The symbol appears in reverse video.

–

Enter the rpm on the decimal keypad.

–

Press the Enter key.

–

Press the F2 function key.

The rail moves to the left at the set rpm.

–

Press the F3 function key.

The rail moves to the right at the set rpm.

–

Press the F1 function key to leave the test program.

–

Press the Stop button.

The material-guide rail moves to its basic position.

Stepper-Test

Stepper-Motor : 1

Speed : 200 U/min

right

left

<n>