Programming instructions

6.4.2 Testing working memory
This program tests the microcomputer’s working memory (RAM).
–
Press the Enter key to run the test program.
The display shows the test result.
display remark
RAM OK working memory functioning perfectly
RAM error error in the working memory
–
Press the F1 function key to leave the test program.
6.4.3 Selecting receiver elements
This program selects receiver elements.
CAUTION:
All receiver elements have been carefully adjusted in
our works. Re-adjustment and correction may only be
carried out by trained service personnel.
S = main-distributor receiver elements. F2 to select.
SC = external receiver elements. F3 to select.
–
Press the Enter key to run the test program.
Input-Select
S ? --
Input-Nr.:
<
S
SC
40