Programming instructions

Number of stitches

The number of stitches for the individual regions of the dart or the

side-seam is entered separately for the three different fabric

thicknesses.

The dart or side-seam is divided into different vectors.

The required number of stitches can be entered for the following

vectors:

vector description

12 opening seam

13 front transition region

21 front compression

31 seam

22 back compression

14 back transition region

15 closing seam (only possible with type 005)

1F run-out

Procedure

–

Select the "number of stitches" parameter with the cursor keys.

–

Press Enter.

A screen for selecting "dart" or

"side seam" appears.

–

Select the required sewing operation (dart/side-seam) with the

cursor keys.

–

Press Enter.