Programming instructions

6. Settings and test programs

The machine software includes various machine-specific settings and

test programs, as well as the well-known Multitest system.

A terminal self-test checks the individual components of the operating

terminal.

6.1 Calling the setting and test programs

Once the sewing machine has been switched on, pressing function

keys F1 to F4 switches to the various groups of setting and test

programs.

Turn on the

main switch

Machine parameters machine-specific Multitest system terminal self-test

Setting and test (only for service persons)

programs

–

Turn on the main switch.

The controller is initialised.

The DÜRKOPP-ADLER logo briefly appears in the display.

–

While the logo is being displayed press the "Stop" key, then one of

the function keys F1 to F3.

The display switches to the corresponding group of setting and test

programs.

F1 F2

Stop

Selftest

List

RAM

EPROM

RAM-Card

Keyboard

Interface

Display

Exit