Programming instructions

5.6 Program sequences ( PS )
Individual sewing programs or program sequences are grouped
together under this menu item.
A total of 50 independent program locations is available.
A program sequence may consist of a maximum of two sewing
programs in any order.
Program a program or program sequence
–
When the main screen is displayed press function key
F3
.
The display switches to the program-location screen.
Four program locations appear in the display.
–
Move the cursor to the required
program location with cursor keys ”#" or "$" or select a program
location on the decimal keypad.
The number of the selected program location appears in reverse
video.
–
Press Enter.
The program location is selected.
Program a program.
–
Press Enter.
The program location is selected.
–
Enter the number (01...99) of the required sewing program on the
decimal keypad.
Single-digit sewing-program numbers must be preceded by a "0".
–
Press Enter.
The sewing program is saved.
Pressing the ”
ESC
” key during the programming process restores
the old sewing sequence.
–
Pressing function key
F1 switches the display back to the main
screen.
Program a program sequence.
–
Press Enter.
The program location is selected.
–
Enter the number (01...99) of the second required sewing program
on the decimal keypad.
The sewing program is saved.
743-115
X
01 MUSTERMANN R____ --- 02 Mustermann L____
37.
03 MUSTERMANN R____ --- 04 Mustermann L____
38.
60 Gerry_01________
40.
98___________________ --- 99_________________
39.
AU
28