Programming instructions

Program dart form

This is where the dart-length co-ordinates are programmed.

You are prompted to enter only the co-ordinates required for the seam

type in question.

Entry: select the dart length with the cursor keys.

Procedure

–

When the main screen is displayed press function key

The display switches to the ”sewing program” screen.

–

Select the "

dart depth

" parameter with cursor keys ”!" or """.

The parameter symbol appears in reverse video.

–

Press Enter.

The dart-depth window appears.

Select the "

same dart depth for all

" parameter with the

cursor keys "!" or """.

The parameter symbol appears in reverse video.

–

Press Enter.

–

Select the "

dart form

" parameter with cursor keys ”!" or """.

The parameter symbol appears in reverse video.

–

Press Enter.

–

A table of all the dart lengths appears.

–

Select the required dart length with cursor keys ”!" or """

(example: dart length 270).

The dart length appears in reverse video.

–

Press Enter.

–

Select and enter values for the individual coordinates.

–

Example (type 004)

Y01 = 4.0, X01 = 200.0, Y02 = 10.0, Y02 = 150.0, Y03 = 8.0