Programming instructions

"Change thread" message

This menu prepares for a thread change.

–

Press key 2 on the decimal keypad.

The material-guide rail moves to the left and the "change thread"

screen appears.

When a thread-change is carried out, the required steps are shown on

the screen.

–

Press Enter.

The instruction "raise protective hood" appears.

–

Raise the protective hood.

The instruction "open slide-plate lock" appears.

–

Open the slide-plate lock and push the slide plate fully to the right.

The instruction "switch the sewing machine off" appears.

–

Switch the sewing machine off.

–

Carry out the thread change.

See Operating instructions, section 3.2.

–

Push the slide plate to the left and engage.

–

Lower the protective hood.

–

Switch the sewing machine back on.