Programming instructions

"Thread break" message
If a thread break occurs during sewing, a message to that effect
appears at the end of the sewing cycle.
When a thread-change is carried out, the required steps are shown on
the screen.
The thread-break message can be cleared with the ”ESC” key.
–
Press Enter.
The instruction "raise protective hood" appears.
–
–
Raise the protective hood.
The instruction "open slide-plate lock" appears.
–
–
–
Open the slide-plate lock and push the slide plate fully to the right.
The instruction "switch the sewing machine off" appears.
–
Switch the sewing machine off.
For subsequent procedure see Operating instructions, section 3.2.
14