Programming instructions

Piece counter
The current piece-counter reading is displayed on the right
(e.g. "Σ : 0099").
The piece counter shows the number of pieces completed since the
last time the counter was reset.
The piece counter is reset under "Global parameters" (function key
F1
).
Dart-length table
The table of dart lengths with their allocated sizes displays the dart
length currently set in reverse video in the middle of the corresponding
window. The minimum and maximum dart lengths are exceptions.
Examples:
Representation of the minimum dart length:
Representation of the dart length:
Representation of the maximum dart length:
Changing parameters
The icons in the lower display area allow fast access to the four most
important menus of the current sewing program.
1: change rail
2: change thread
3: select fabric thickness
4: stack time []
The functions and settings of the individual parameters are described
in more detail in sections 5.4 ("Global parameters") and 5.5 ("sewing
program").
180 22
190
200
23
25
30
24
31
26
27 28
32
33
34
250 56
260
270
56
62
102
58
66
106
64
60
94
98
310
320
330
110
114
118
64
66
102 106
54
56
58
12