Programming instructions

5.3 Main screen

The main screen displays the seam image, sewing program and

program sequence, program name and the dart lengths with their

allocated sizes.

Seam image

The upper part of the main screen displays the contours of the

selected seam image.

Below the seam image an information line appears with the following

information:

Program number and program sequence

(see also section 5.6)

The selected sewing program or program sequence appears in the

upper left-hand corner of the display. The program currently selected

is underlined.

If the automatic sewing-program switch is on, sequence arrows are

displayed between the individual sewing programs.

–

Switch programs or program sequences with cursor keys "#" or

"$":

–

the "#" key selects the previous program sequence

–

the "$" key selects the next program sequence.

Selecting a sewing program in the current program sequence

In the program sequence a bar identifies the sewing program selected.

–

Switch sewing programs with cursor keys ”!" or """.

–

the "!" key selects the previous sewing program

–

the """ key selects the next sewing program.

Program name

Here the program name of the current sewing program is displayed.

Guide-rail code

Each material guide-rail has its own code which is read by the

controller.

743-115

PS SP

160 46

170

180

1234

04 03

Mustermann___ 01 : 0099