Programming instructions

5.2 Starting the machine program
–
Turn on the main switch.
The controller is initialised.
–
The DÜRKOPP-ADLER logo briefly appears in the display.
If one of the function keys
F1
to
F4
is pressed while the logo is
being displayed, the display switches to the corresponding group
of setting or test programs.
–
The material guide-rail executes its reference travel.
–
The display switches to the main screen.
You can switch from the main screen to the various
sewing-program parameter screens with function keys
F1
to
F3
.
–
Press the "
STOP
" key to leave the machine program.
The controller is initialised.
10