Programming instructions

1.3.2 Starting of sewing machine programme
–
Switch on the main switch.
The control system is initialised.
The start message is displayed.
To operate the sewing machine, the sewing axes must first be
positioned in the reference position.
CAUTION!
The reference run must be carried out by the operator.
CAUTION Risk of breakage!
Do not insert a material clamp during the reference run.
The following display indicates that a reference run is necessary:
To manually remove a material clamp that is inserted in the machine,
press the arrow keys “ ” and “ ”.
–
Press the “OK” key.
The reference run is carried out.
After successful referencing, the display changes to:
After 0.5 seconds, the machine programme changes to operating
mode.
4-6