Programming instructions

2. Dacs739 software
2.1 Introduction
The Dacs739 software is a user-friendly tool to create your own sewing
templates for the 739-23 sewing machine.
A two-dimensional graphics editor allows for the design or modification
of seam contours by mouse-click or by numerical entries.
The software package includes a comprehensive help function.
Additional functions:
•
The programme carries out plausibility checks of all entries.
•
Calculation of the ideal material clamp contour after completion of
the seam contour by the programme.
•
Calculation of the fullness contour
•
The material clamp contour can be printed out on a scale of 1:1.
•
The seam contour, material clamp contour and fullness contour can
be written to a transponder by means of a read/write device.
•
All data of the material clamps can be archived, reread and
modified.
2.2 System requirements
Dacs739 requires the following hardware and software components:
•
PC with 486 or Pentium processor
•
MS Windows 95, 98 or NT version 3.5.1 or later
•
Minimum 16 MB RAM
•
CD-ROM drive or 3.5 “ floppy disk drive
•
10 MB free memory on hard disk
•
Free serial port
•
VGA graphic card, min. 600 x 800 pixels, 256 colours
•
Mouse
•
Windows-compatible printer including driver
4-31