Operating instructions

5.12 Adjusting the sewing-foot pressure

Sewing-foot pressure is adjusted with screw 1.

–

to increase sewing-foot pressure: turn screw 1 clockwise

–

to reduce sewing-foot pressure: turn screw 1 anticlockwise.

5.13 Adjusting the stitch length

Caution: danger of injury

Turn off the main switch.

The stitch length may only be adjusted with the sewing

machine switched off.

–

Turn wing-nut 2 anticlockwise as far as it will go.

–

Adjust the desired stitch length with screw 3.

To increase stitch length: turn screw 3 anticlockwise.

The stitch-length handle 4 moves down.

To reduce stitch length: turn screw 3 clockwise.

The stitch-length handle 4 moves up.

–

Tighten wing-nut 2 clockwise.

To sew bar tacks manually (backwards sewing):

–

Swivel the stitch-length handle 4 up as far as it will go (to position "

").

The machine sews backwards as long as the stitch-length handle 4 is held up.