Instruction manual

10.2 Oil lubrication
Caution: danger of injury !
Oil can cause skin rashes.
Avoid prolonged skin contact.
If oil or grease contacts your skin, wash yourself thoroughly.
CAUTION !
The handling and disposal of mineral oils is subject to legal
constraints.
Deliver used oil to an authorized reception point.
Protect your environment.
Take care not to spill any oil.
Oil the sewing machine exclusively with the lubricating o il DA-10 or an
equivalent oil with the following specification:
Viscosity at 40° C : 10 mm²/s
Flash point: 150° C
DA-10 can be purchased at sales branches of
DÜRKOPP ADLER AG, under the following part numbers:
250-ml container: 9047 000011
1 litre container: 9047 000012
2 litre container: 9047 000013
5 litre container: 9047 000014
Maintenance required Explanation Operational
interval, hours
Lubrication of the machine
head
The head is equipped with centralized o il wick
lubrication. The bearings are supplied by the
oil reservoir 1.
- The oil level must not drop below the
mark 3 on the oil reservoir.
The oil reservoir illuminates when the oil
level falls below the mark 3.
(Only for subclass 669-180312)
- Refill oil through the hole 2 until it reaches
the “Max” mark.
8
32
1