Instruction manual

8. Tilting Back the Machine Head
Caution – Risk of injury from crushing !
Do not reach between the base and the machine arm while you are
tilting back the machine head.
Tilting back the machine head
–
Press lever 1 upwards.
The locking mechanism is then released.
–
Tilt the machine head 3 to the rear.
The machine head 3 will be supported by the strap 2.
Re-closing the machine head
–
Tilt the machine head 3 forwards.
The head tilts back to the position shown in the illustration below.
–
Pull lever 1 back up and carefully tilt the head downwards.
Caution!
Only tilt the head up briefly (i.e., for maintenance work).
If the head is tilted back for a longer period (for a night or weekend), oil
can leak out in the hook area.
28
1
32
1