Instruction manual

Key Function

LED display “Power On”

The key 7 can be assigned a function using the screw 6 found under

the switch.

–

Select a function.

For example: 6 = sew backwards manually

–

Then press in the screw under key 5 and turn 90° to the right (the

slot is then vertical).

This function can now be activated using either key 5 or 7.

CAUTION !

You must deactivate any previous assignment before assigning key 9

another function.

7. Sewing

7.1 Sewing with machines using the FIR clutch positioning drive

You can find a comprehensive description of the control unit in the

current operating instructions from the motor manufacturer ( included).

With the pedal

0Atrest

1 Sewing forwards with minimum speed

2 Sewing forwards with higher speed

:::

3 Sewing forwards with maximum speed