Operating instructions

Controller with the OP7000 control panel
Operating Instructions 650-16 - 01.0 - 06/2014 87
8 Controller with the OP7000 control panel
8.1 OP7000 control panel
All settings for the 650 sewing machine are performed using the
OP7000 control panel.
Figure 61: OP7000 control panel
The activation of the sewing motor and the stepper motors is
performed by the DAC3 controller in conjunction with the OP7000
control panel with the user interface in symbolic representation.
The program automation permits either manual or automatic con-
trol of fullness, optionally upper or lower, curve support and also
the programming of sewing steps with individual parameters.
Up to 999 sewing programs can be saved.
Each sewing program can contain up to 30 sewing steps.
Each sewing step can be assigned various parameters such as
stitch length, fullness values, curve support, thread tension,
segment length etc.
The seam programs are displayed continuously whilst sewing is
in progress. Programs can be mirrored for the other side of the
sewing material.