Operating instructions

Controller with the OP3000 control panel
Operating Instructions 650-16 - 01.0 - 06/201484
7.8.2 Copying the program
The selected program is copied into a new program number.
1. Press the key.
 The softkey menu appears.
Figure 56: Softkey menu
2. Press the key.
 The following display appears:
Figure 57: Copying the program
 The controller displays the next free program number.
3. Press “OK” to load the program number.
Or:
Select another program number using 
/ or input a pro-
gram number using the keypad keys “0 - 9” and then press
“OK”.
 The program number is loaded.
The following display appears, with the program number
flashing:
Figure 58: Display after specifying the program number
4. Load the desired changes into the new program.
5. Press the “ESC” key.
 The controller exits Programming mode and reverts to Auto-
matic mode.