Operating instructions

Controller with the OP3000 control panel
Operating Instructions 650-16 - 01.0 - 06/201482
7.8 Programming mode
7.8.1 Creating a program
1. In Edit mode, press the key.
 The softkey menu appears.
Figure 51: Softkey menu
2. Press the key.
 The following display appears:
Figure 52: Select the program number
The controller displays the next free program number.
3. Press “OK” to load the program number.
Or:
Select another program number using 
/ or input a pro-
gram number using the keypad keys “0 - 9” and then press
“OK”.
 The program number is loaded.
The following display appears, with “P” flashing:
Figure 53: Display after specifying the program number
4. If necessary change the sleeve side or other parameters, 
7.7 Edit mode, page 79.
5. Press the key.