Operating instructions

Controller with the OP3000 control panel
Operating Instructions 650-16 - 01.0 - 06/2014 81
7.7.2 Changing further parameters for the selected
program
This menu allows further parameters for the current sewing
program to be changed.
1. Use 
/to select the field .
2. Press the “OK” key.
 The submenu opens.
3. Use 
/ to select the desired parameter.
4. Press the “OK” key to activate or deactivate the parameter,
or use 
/ to change its value and press “OK” to confirm it.
5. Exit the submenu using “ESC” or 
Symbol Meaning
Thr. Tens (thread tension)
Stitchlen. (stitch length)
Foot Press. (presser foot pressure)
Fulln. Corr. (fullness correction)
Start Tack (bartack at the start of a seam)
End Tack (bartack at the end of a seam)
Thread Trim (thread cutoff)