Operating instructions

Controller with the OP3000 control panel
Operating Instructions 650-16 - 01.0 - 06/201480
7.7.1 Changing further parameters for the current
step
1. Use /to select the field .
2. Press the “OK” key.
 The submenu opens.
3. Use 
/ to select the desired parameter.
4. Press the “OK” key to activate or deactivate the parameter,
or use 
/ to change its value and press “OK” to confirm it.
5. Exit the submenu using “ESC” or 
Symbol Meaning
Step. Len. (step length)
Auto Forward
(automatic step progression)
Alternate (sewing foot alternation)
Foot Press (presser foot pressure)