Operating instructions

Controller with the OP3000 control panel

Operating Instructions 650-16 - 01.0 - 06/2014 73

1. Sew, press the knee switch or press the “OK” key.

 The program switches to the 1st step.

7.5.2 Sewing process

1. Push the pedal forwards and sew.

 The following information is shown on the display:

Figure 41: Display when sewing in Automatic mode

The parameter values for the current step are shown in the display.

The program bar (1) shows the progress of the seam.

The number under the current step shows the outstanding length

of the step.

The program bar shows half the current step in bold.

Figure 42: Current step

P Programming mode

Switches into programming mode.

ESC, F, S No function assigned

Symbol Meaning

(1) - Program bar (2) - Current step