Operating instructions

Controller with the OP3000 control panel
Operating Instructions 650-16 - 01.0 - 06/201470
7.4.3 Sewing process
Sewing without fullness
1. Input values for stitch length, thread tension, curve support
and foot alternation.
2. Push the pedal forwards and sew.
Sewing with fullness
1. Change the fullness with the left pedal (optional)
(if set at the technician level).
Or:
1. Alter the fullness using the “0” to “16” and “+/-” keys.
Altering parameters whilst within the seam
1. Move the pedal to the “0” position.
2. Change the desired parameter on the control panel.
3. Push the pedal forwards again and sew.
 The seam will be sewn using the altered parameter value.