Operating instructions

Controller with the OP3000 control panel
Operating Instructions 650-16 - 01.0 - 06/2014 69
7.4.2 Menu for other settings
1. Use / to select the “Other parameters”.
2. Press the “OK” key.
3. Use / to select the desired parameter.
4. Select the parameter using the “OK” key.
5. Change values using the / keys.
6. Click on the “OK” button to confirm.
7. Press or “ESC” to exit the menu.
Quick programming
Press the key “5”.
Quick programming starts.
Bobbin mode
• Press the key “6”.
• Push the pedal halfway backwards.
Bobbin mode is ended.
Symbol Meaning
Symbol Meaning
Alternate (foot alternation)
Value range: 0.0 to 2.5 mm
Foot Press. (presser foot pressure)
Value range: 1 – 15
Start Tack (bartack at the start of a seam)
Value range: on/off
End Tack (bartack at the end of a seam)
Value range: on/off
Thread Trim (thread cutoff)
Value range: on/off