Operating instructions

Controller with the OP3000 control panel
Operating Instructions 650-16 - 01.0 - 06/201468
7.4.1 Quick access function (softkey menu)
Here you have quick access to functions during the sewing
process and can also assign a function to the upper softkey.
1. Press the lower softkey .
 The following information is shown on the display:
Figure 39: Softkey menu
2. Call up a function:
• Press the numeric key under the designed function.
or
Assigning a function to the upper softkey:
• Press the numeric key under the designed function and
at the same time press the upper softkey.
 The function is assigned to the upper softkey and can be
called up by pressing the key.
3. Press ESC to exit the menu.
Symbol Meaning
Manual bartack
• Press the key “1” and keep it pressed for a manual
bartack.
Bartack suppression on/off
• Press the key “2”.
The bartacks are switched on or off.
Needle position up / down
• Press the key “3”.
If sewing is stopped within the seam, the needle is
positioned up or down.
Automatic step progression on/off
(available only in Automatic mode)
• Press the key “4”.
Automatic step progression is enabled/disabled
whilst sewing a seam.