Operating instructions

Controller with the OP3000 control panel
Operating Instructions 650-16 - 01.0 - 06/2014 67
Thread tension
Value range: 1 to 99
• Use / to select the “Thread tension” parameter.
• Use / to change the thread tension
Curve support
Value range: 0 to 6
• Use / to select the “Curve support” parameter.
• Use / to change the curve support
Other parameters
 7.4.2 Menu for other settings, page 69
Seam length in mm
After the thread has been cut off, the display is
retained. Measurement restarts when sewing starts
again.
P Creating a program
 7.8.1 Creating a program, page 82
+/- Switch between upper
and lower fullness
ESC, F and S No function assigned
0 – 16 Fullness values
OK No function assigned
Symbol Meaning