Operating instructions

Controller with the OP3000 control panel
Operating Instructions 650-16 - 01.0 - 06/2014 65
7.3 Controller operating modes
The 650-16 controller has 4 available
operating modes:
• Manual mode (program 000)
Manual mode is the simplest operating mode.
There are no sewing programs and no inputs
for individual sewing steps.
Changes to the fullness, stitch length, thread tension, curve
support and also the activation of other functions are always
implemented immediately.
Thus all the major sewing parameters can be changed man-
ually during the sewing process.
• Automatic mode (program 001 - 999)
Automatic mode allows sewing programs to be executed.
The seams are divided into individual sections (steps) within
the sewing programs. Each step is assigned its own individ-
ual sewing parameters such as fullness, curve support etc.
• Quick programming
Quick programming allows very quick and simple creation of
new sewing programs.
• Programming mode
Programming mode allows new sewing programs to be cre-
ated, edited, deleted, copied, and mirrored (left sleeve / right
sleeve).