Operating instructions

Controller with the OP3000 control panel
Operating Instructions 650-16 - 01.0 - 06/201464
7.2 Switching the sewing machine on
Figure 35: Display of the firmware and software version
1. Switch the main switch on.
 The software version appears on the display:
• On the left of the screen the control panel firmware
• On the right of the screen the controller software version
 The machine performs a reference run:
The display shows the program last used, or manual mode.
Figure 36: Display of the program last used
Figure 37: Display in manual mode
A Upper softkey - 1
Assignment is different for each menu
B Upper softkey - 2
Assignment is different for each menu
+/- Switch between increase and decrease the fullness
Key Function