Operating instructions

Installation

Operating Instructions 650-16 - 01.0 - 06/2014 57

6.9.11 Connecting the equipotential bonding for the

setpoint transducers

Figure 30: Connecting the equipotential bonding for the setpoint trans-

ducers

Steps

1. Screw the protective earth conductor (4) (500 mm long) on to

the setpoint transducer (5) (optional).

2. Lay the cable (4) through the cable duct (3) to the setpoint

transducer (2) and screw it on (optional).

3. Screw the protective earth conductor (1) (650 mm long) on to

the setpoint transducer (2) and to the control cabinet (6).

Danger of life-threatening electric shock

Disconnect the power plug before starting to

connect the equipotential bonding for the setpoint

transducers.

Make sure the machine cannot be accidentally

switched back on.

DANGER

(1) - Protective earth conductor

(2) - Setpoint transducer connection

(main pedal)

(3) - Cable duct

(4) - Protective earth conductor

(5) - Setpoint transducer connection

(additional pedal)

(6) - Attachment to control cabinet