Operating instructions

Installation

Operating Instructions 650-16 - 01.0 - 06/201454

6.9.8 Connecting the equipotential bonding for the

additional controller

Figure 27: Connecting the equipotential bonding for the additional con-

troller

Steps

1. Plug the protective earth conductor (1) into the flat plug (2) on

the additional control cabinet.

2. Lay the cable (2) (300 mm long) to the control cabinet (3) and

screw it on.

Danger of life-threatening electric shock

Disconnect the power plug before starting to

establish equipotential bonding to the additional

controller.

Make sure the machine cannot be accidentally

switched back on.

DANGER

(1) - Protective earth conductor

(2) - Tab connector

(3) - Attachment to control cabinet