Operating instructions

Installation

Operating Instructions 650-16 - 01.0 - 06/2014 53

6.9.7 Connecting the equipotential bonding for the

controller

Figure 26: Connecting the equipotential bonding for the controller

Steps

1. Screw the protective earth conductor (3) of the plug (2) on to

the control cabinet (1).

2. Screw the protective earth conductor (4) (150 mm long) on to

the frame (5) using a toothed shakeproof washer.

Danger of life-threatening electric shock

Disconnect the power plug before starting to

Connecting the equipotential bonding for the

controller.

Make sure the machine cannot be accidentally

switched back on.

DANGER

(1) - Attachment to control cabinet

(2) - Plug

(3) - Protective earth conductor

(4) - Protective earth conductor

(5) - Attachment to the frame