Operating instructions

Installation

Operating Instructions 650-16 - 01.0 - 06/2014 51

6.9.5 Connecting the setpoint transducers to the

controller

Figure 24: Connecting the setpoint transducers to the controller

Steps

1. Connect the setpoint transducer for the main pedal to the

“Speed” plug (1) (X120b).

2. Connect the setpoint transducer for the additional pedal to the

“Fullness” plug (2) (X120t).

Danger of life-threatening electric shock

Disconnect the power plug before connecting the

setpoint transducers to the controller.

Make sure the machine cannot be accidentally

switched back on.

DANGER