Operating instructions

Installation
Operating Instructions 650-16 - 01.0 - 06/201446
6.8 Inserting the machine upper part
Figure 20: Inserting the machine upper part
Steps
1. Using the transport eye (1), lift the machine upper part and
insert it into the cut-out on the table top.
2. After the upper part has been placed in position, immediately
connect the bracket (2) which prevents the upper part coming
loose if the table top is tipped.
The bracket is included in the accessories pack for the upper part.
If the machine is supplied ready assembled, the transport eye is
included in the accessories pack.
(1) - Transport eye (2) - Clamping plate
1
2
Risk of injury due to the upper part tipping
When transporting the machine, secure the upper
part against tipping.
WARNING