Operating instructions

Installation

Operating Instructions 650-16 - 01.0 - 06/2014 41

6.3 Assembling the frame

Figure 15: Assembling the frame

Steps

1. Attach the pedal (2) to the cross brace (1).

2. Attach the additional pedal (3) (optional) to the cross brace (1).

3. Attach the cross brace (1) to the frame.

4. After the machine has been fully assembled, align the pedals,

 6.5 Attaching the table top and pedals to the frame,

page 43.

5. Screw the setpoint transducers (4) and (7) on to the frame

brace (5). Distance between the floor and the upper edge of

the frame brace (5): 290 mm.

6. Screw the cable duct (6) (30 x 30 x 250 mm) for the setpoint

transducer cables on to the frame brace (5).

7. Turn the adjusting screw (8) to ensure that the frame stands

securely. The frame must stand with all four feet on the floor.

(1) - Cross strut

(2) - Main pedal

(3) - Additional pedal

(4) - Setpoint transducer for the

additional pedal

(5) - Frame brace

(6) - Cable duct

(7) - Setpoint transducer for the main

pedal

(8) - Adjusting screw