Operating instructions

Operation
Operating Instructions 650-16 - 01.0 - 06/2014 37
5.10Sewing
Before starting sewing
Initial situation • Pedal is in the rest position.
Sewing machine is at a standstill.
Needle is up. Presser foot is down.
Position material at the start of
the seam
• Push the pedal half backwards.
The presser foot rises.
• Position the sewing material.
• Release the pedal.
The presser foot descends on to the sewing
material.
At the start of the seam
Starting bartack and sewing
the seam
• Push the pedal forwards and keep it there.
Starting bartack is sewn (if specified).
Then the machine sews along the seam at the
speed determined by the pedal.
In the middle of the seam
Stopping sewing • Release the pedal (position 0).
The machine stops in the 1st position (needle
down) or in the needle up position (depending on
the setting chosen).
The presser foot is down or raised
(depending on the setting chosen).
Continue sewing
(after releasing the pedal)
• Press the pedal forwards.
The machine continues to sew at the specified
speed.
Intermediate raising • Push the pedal half backwards.
The presser feet are raised.
• Correct the material.
• Release the pedal.
The presser feet are lowered.
Altering the fullness • Press the fullness button or the left pedal.
The selected fullness value is activated.
At the end of the seam