Operating instructions

Technical Specifications
Operating Instructions 650-16 - 01.0 - 06/201412
• Alternating belt upper transport (programmable), allowing
easy passage of the material past the needle. Maximum alter-
nation height 2.5 mm (depending on the speed)
• Electronically regulated thread tension (programmable), for
different materials and for heavy gathering
• Patented curve support for easy material handling (program-
mable)
• Electromagnetic thread cutter
• Automatic bartack
• Raising the presser foot: 12 mm
• Built-in adjusting disc with positioning marks on the hand-
wheel for quick checking of the machine setting.
• Edge stop stepping width from 7.5 mm
• OP3000 button bar with graphics display
• Within reach of the operator
• Gathering values between - 6 and 16, i.e. a maximum of
23 available gathering values.
• Graphics display allows easy creation of programs by
teaching, editing, copying and deletion
• Direct input of the gathering value by correction in auto-
matic mode or in manual mode.
• OP7000 control panel
• 5.7” touch screen with 16-bit color depth
• USB connection type A (use only a USB stick with the part
number 9805 791113)
• the same scope of functionality as for OP3000
• the additional graduation function for automatic adaptation
of the program to different sizes
• graphical representation of the segments of the armhole
with concurrent progress display
• Optional second pedal
When the pedal is pushed forwards the fullness for a step is
increased by one gathering value; when it is pushed back-
wards it is decreased.
When the next step is called up the gathering value specified
in the program applies once again. Alternatively, depending
on the setting in the technician level the curve radius altered
in the same way.