Operating instructions

Controller with the OP7000 control panel
Operating Instructions 650-16 - 01.0 - 06/2014 121
8.7.3 Copying the seam program
Prerequisite:
• Operating mode EDIT is displayed.
1. Select the seam program,  page 100.
2. Press the P
COPY
button.
 The seam program is copied and saved in the next free pro-
gram slot. An appropriate message is displayed.
8.7.4 Deleting the seam program
Prerequisite:
• Operating mode EDIT is displayed.
1. Select the seam program,  page 100.
2. Press the P
DEL
button.
 A message is displayed asking whether you really wish to
delete the active seam program.
3. To delete the program, confirm by pressing the Yes button.
 The seam program is deleted. An appropriate message is
displayed.